![]() ![]() Be careful here as the crackle is usually very powdery and will sand off in a hurry.ĥ - Apply sealer or self-seal topcoat per manufacturer's recommendations. ![]() Practice on sample boards until you get the desired crack size.Ĥ - If needed, lightly scuff the crackle with a scotch brite pad or super-fine sponge. If applying pigmented basecoat, apply enough coats (sand between) to give full-filled finish.Ģ - Sand to 320 or 400 (the smoother the surface, the easier the crackle lacquer slides to form the cracks.)ģ - Apply crackle lacquer (tinted to desired color if applicable). What is your application process? If spraying a conventional crackle lacquer, the size of the cracks is controlled by the amount you apply: less wet film = finer cracks heavier film build = larger (wider) cracks.įor me, a standard finishing schedule for crackle would be:ġ - Apply NC primer tinted to desired basecoat color or apply clear sealer over desired stain color. What should I use for this? What kind of top coat will protect it best? I am trying to get a very fine crackle effect, like you see in old China - very thin lines. I tried the commonly available acrylic crackle glaze with a coat of acrylic paint on top (various cuts and thicknesses for both), but the effect is too coarse - looks like barn board. Customers requested a fine crackle finish on the doors and drawer fronts of the maple kitchen I am building for them. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |